network¶

Primary audience: TAPPaaS admin.

The TAPPaaS network VM (OPNsense) — routing, zones/VLANs, DNS, DHCP, NAT, per-module firewall rules and the Caddy reverse proxy for every published service.

What you get¶

Architecture¶

flowchart TB
    subgraph Capabilities
        NetSec[Network Security Capability]
        RevProxy[Reverse Proxy Capability]
    end

    subgraph NetworkModule["network module"]
        OPNsense[OPNsense]
        subgraph SubComponents["Sub-Components"]
            Rules[Firewall Rules]
            DNS["DNS: Unbound + Dnsmasq"]
            DHCP[DHCP]
            Zones[Zones / VLANs]
            Caddy[Caddy]
        end
        FirewallService([firewall service])
        NATService([nat service])
        RulesService([rules service])
        DNSService([dns service])
        DiscoveryService([discovery service])
        ProxyService([proxy service])
        OPNsense --> Rules
        OPNsense --> DNS
        OPNsense --> DHCP
        OPNsense --> Zones
        OPNsense --> Caddy
        FirewallService -.->|provided by| OPNsense
        NATService -.->|provided by| OPNsense
        RulesService -.->|provided by| Rules
        DNSService -.->|provided by| DNS
        DiscoveryService -.->|provided by| DNS
        ProxyService -.->|provided by| Caddy
    end

    subgraph ClusterModule["cluster module"]
        VMService([vm service])
        HAService([ha service])
    end

    NetSec -.->|realized by| OPNsense
    RevProxy -.->|realized by| Caddy
    OPNsense -->|depends on| VMService
    OPNsense -->|depends on| HAService

The Network Security and Reverse Proxy capabilities are realized by the OPNsense VM and its Caddy plugin. The module provides the firewall, proxy, rules, discovery, dns and nat services (the provides in network.json) that consumer modules depend on; the VM itself is created and kept highly available by the cluster module.

What is not included¶

• TLS certificate issuance — run acme-setup.sh on the mothership after bootstrap (repo-root INSTALL.md §2.3).
• Managing a non-OPNsense firewall: with firewallType: "NONE" the tooling only prints the rules for manual entry into your own firewall.
• Vendor automation for switches/APs beyond the shipped plugins (UniFi; manual.sh is the by-hand fallback for everything else).
• The admin VPN / satellite ingress — see the satellite module and ADMIN-VPN.md (network-manager wgvpn).

Requirements¶

• A cluster node with the lan/wan bridges built (cluster module, config-network.sh).
• Internet on the WAN side to download the prebuilt firewall image at bootstrap.
• Defaults (from network.json): VM 110, 4 cores, 8 GB RAM, 32 GB disk on tanka1, net0→lan (trunk ALL), net1→wan.

Alternatives considered¶

• pfSense — the original, but going more and more commercial.
• OpenWRT — seems less scalable and less feature-rich.
• Proxmox built-in firewall — would be easier (already built in), but less secure.

Source: the TAPPaaS curation criteria (Design Principles, tappaas.org What → Principles). Depth: see DESIGN.md.

Dependencies¶

Split-horizon DNS — network:proxy (ADR-021)¶

A published service answers at one URL inside and out. Inside, Unbound holds the override, and the answer is always the DMZ gateway — where os-caddy listens — regardless of which zone asked (ADR-021 D2). One name, one answer, one writer.

The address comes from one resolver, which every writer calls rather than deriving its own (D5):

network-manager split-horizon-target <domain>
    exit 0  → stdout is the address to register
    exit 3  → UNPUBLISHED: no public DNS for this name
    exit 1  → error: the site cannot express an answer (no dmz zone)

Before this, three code paths each transcribed the rule and disagreed on a live site (#577): network:proxy resolved a client zone, while acme-setup.sh and environment-manager resolved a service zone. Do not reintroduce a local derivation, however small — that is precisely how the drift started.

Reachability is not encoded in the address. A client reaches the DMZ gateway via the caddy-reach firewall rule (/32, tcp 80+443 — see network-manager's ZONES.md), and authorization is Caddy's proxyAllowedZones ACL plus the Authentik identity gate. No zone gets access-to: dmz; that would grant the whole DMZ subnet including the firewall's own GUI and SSH (#618).

A service with no public DNS record is supported, not broken (R3). ACME cannot issue for a name that does not resolve publicly, so there is no certificate and nothing for Caddy to serve. Install and update succeed, publishing is skipped cleanly, and the operator gets one line saying what was lost:

<module> is not published (no external DNS for <domain>) — reachable only at <module>.<zone>.internal, without TLS and without the identity gate.

That is a different message from "I could not work out the address for a service that should be published", and the two must not be conflated.

For installation steps see INSTALL.md.

Design and implementation detail: DESIGN.md. Test coverage: TEST.md. Troubleshooting: the Unbound / DNSBL section of DESIGN.md.